Author:Site Editor Publish Time: 2021-09-09 Origin:Site
Please check that all components are present
Before installation ensure that all fee lines are clear of debris and on/off valve is present
Ensure water pressure is between 20-125psi (includes a combination of hot and cold feed lines)
Pictures in the manual are general in content and may not represent exactly your purchased faucet, if you are having difficulties please contact a professional plumber
If you will be away from home for an extended period you should shut off the main water supply.
Step 1: Remove locking-nut, metal and rubber washer, and hose connector if installed.
Step 2: Install faucet through the center hole, re-install rubber and metal washer followed by the lock-nut, re-install hose connector if removed ensuring small rubber washer is also installed. Using a screwdriver tighten the lock-nut screws so that the faucet is secure and will not twist.
Step 3: Push pull out hose into the hose connector until you hear a click sound
Step 4: Proper installation of the hose weight kit will ensure that the spray head retracts smoothly, on the spray side of the hose, measure 15” down from the body of the faucet. Install the hose weight kit at this point, pull it out on the spray head. It should move easily and retract smoothly, reposition the hose weight kit as necessary
Step 5: Attach the flexible hose to the water supply
Step 6: Hold on to the spray head hose, unscrew the spray head and remove it along with the rubber washer, turn on the faucet to flush the hose and feed line for 1 minute to flush debris, turn off the faucet and re-install the rubber washer, and spray head.
Step 7: Turn the faucet on and press the top of the spray head button to change to spray.
Step 8: Run the faucet on and press the bottom of the spray head button to change to stream.